Keyless Entry Remote Fob Clicker for 2000 Honda Accord With Do-It-Yourself Programming Review
Pre-Owned FCC ID: KOBUTAH2TPart #: 1998-1999; 72147-S84-A01 (72147S84A01) H/C 54419102000-2002; 72147-S84-A03 (72147S84A03)H/C 6249049 Canada/Mexico Part #: 1983 102 297 (1983102297)LED Light: Red Battery: Yes, Installed CR2025Buttons: 4: Lock, Unlock, Panic, TrunkFrequency: 315MHz Compatible Vehicles*: 1998 (**for EX Models ONLY), 1999, 2000, 2001, 2002 Honda Accord** If you have a DX or LX 1999 Honda Accord you will need FCC ID: A269ZUA101 Transmitters for the 1998-99 Accord and the 2000-02 Accord look exactly alike, however; they are not interchangeable. 1998-99 transmitter works the doors of a 2000-03 Accord, but it does not open the trunk.Programming the Transmitter? Entering the programming mode cancels all learned transmitter codes, so none of the previously programmed transmitters will work. You must reprogram all of the transmitters once you are in the programming mode.? You must complete steps 1-6 within 4 seconds of the previous step to keep the system from exiting the programming mode.1. Turn the ignition switch to ON (II).2. Press the "Lock" or "Unlock" button on one of the transmitters. (An unprogrammed transmitter can be used for this step.)3. Turn the ignition switch to LOCK (0).4. Repeat steps 1, 2, and 3 two more times using the same transmitter used in step 2.5. Turn the ignition switch to ON (II).6. Press the "Lock" or "Unlock" button on the same transmitter. Make sure the power door locks cycle to confirm that the system is in programming mode.7. Within 10 seconds, press the "Lock" or "Unlock" button on each transmitter. Make sure the power door locks cycle after you press each transmitter button to confirm that the system accepted the transmitter's code.8. Turn the ignition switch to LOCK (0) to exit the programming mode. Read more...
0 comments:
Post a Comment